It is your car that will be able to run excellent once it will have the right amounts of fluids. One of the important fluids that your car must have is the antifreeze or coolant. This is needed to sure that your car will not overheat. This one works by absorbing excess heat in your engine. Always make sure that you will be able to keep this fluid on its normal level.-read more here
It is changing the coolant that you will need to do based on the mileage of your car. Most of the time, it is you that will have to change your coolant after 60,000 miles up to 100,000 miles. You also can check the manual of your car to determine when you will have to change your coolant. It is your coolant that should not run low. t is your radiator that might have a leak once your coolant runs low.
Buying a new coolant for your car is one of the things that you need to do when changing it on your own. It is also important that you will be buying a radiator flush product. This is needed to clear out your cooling system. There are steps that you will need to follow after securing these things.
Once you are chagrin your coolant then the first thing that you need to do is to mind your safety firs. Always make sure that you will not be changing your coolant while the engine is running. Letting the engine cool off first is a thing that you will need to do before starting the procedure.-read more now
What you need to do next is to remove the radiator cap and locate the drain plug. Placing a pan under the drain plug is a thing that you will need to do to catch the old coolant. Once you are ready, you can now loosen the plug and let the coolant drain into the pan.
Filling the cooling system with ware is the next thing that you will need to do. It is the remaining coolant that can be flushed out once you will do this one.
The next thing that you need to do is to put the radiator cap back on and run the engine for at least 10 minutes. Whenever this is done then water will be able to flow. Turning the car off and letting the engine cool again is a thing that you need5 to do once the time elapsed. See to it that you are able to do this one at least 3 more times.-this service
Putting the radiator flush to the cooling system is the next thing that you need to do. Put the radiator cap and let the engine run again.
Letting the engine cool down is a thing that you will need to do once you are done. You can now close the drain plug and our the coolant into the cooling system.